cloud – Page 9 – dynaMACS – Sales Agency Software

Tip #1405 – Maximize the dynaMACS State/Region Zip Code Feature

May 29, 2014/in dynaMACS Support Tips /by dynaMACS Software

dynaMACS has a powerful feature that automatically populates the State/Region field based on the Zip Code entered when adding or updating customer records (provided a valid 5 digit zip code is used). The use of the State/Region code is beneficial when generating reports in either Sales IQ or a Sales Analysis report. The following instructions show you how to activate this feature.

***IMPORTANT! PLEASE create a restore point before activating this feature and running the utilities!***

Example of a State/Region Report printed from Sales Analysis Rpt Generator:

Step 1: Turn on the Auto Build State/Region Feature in System Information Setup

From the dynaMACS main screen select Other Functions>Administration>System Information Setup.
Select the System Options tab.
Check the box Automatically build State/Region upon Zip Code Change?
Select the Save button.

Step 2: Run System Utility 1007 (Creates Customer State/Region codes table)

From the dynaMACS main screen select Other Functions>Utilities>System Utilities
Select Utility #1007
Select the Run button
Select the Yes button on the Confirmation dialog box.

Step 3: Run System Utility 1008 (Replaces Customer State/Region codes in customer records)

From the dynaMACS main screen select Other Functions>Utilities>System Utilities
Select Utility #1008
Select the Run button to complete the update.

Tip #1404 – Using Sales IQ Filters in Versions 2013 and Above

April 29, 2014/in dynaMACS Support Tips /by dynaMACS Software

The Sales IQ Filters screen has been redesigned to include or exclude “ranges” of selection criteria. For example, instead of selecting one State/Region code you can now enter a range of State/Region codes to filter on and then include them or exclude them from the list. The new features include:

Selection Criteria field with options Starts With, Contains, or Does Not Contain
Value fields to be used in conjunction with the Selection Criteria fields
Include or Exclude This Range field

Example:

In the following example we will filter all customers in the State/Region range of OH439 thru OH440.

In the Customer section of the Filters screen select Starts With from the drop down box in the State/Region field.
Enter OH439 in the lookup field directly to the right of Starts With.
Enter OH440 in the lookup field directly to the left of Include/Exclude This Range.
SelectInclude this Range from the range drop down box.
Select the Apply Button.
After selecting Apply, you will be returned to the Sales IQ screen and only customers in State/Region code range OH439 thru OH440 appear in the Customer list.
To clear the filter select Normal Data from the Filter drop down list.

Case Study: Bowerman Marketing Group

April 15, 2014/in Case Studies /by dynaMACS Software

“dynaMACS takes reporting capabilities to new levels.”

Judy Tingley, Office Manager
Jane Janosik, Customer Service
Bowerman Marketing Group

Client Challenge

In 2004, Bowerman Marketing Group learned that the sales agency software they had been using was discontinued. The software had been sufficient and provided the agency with good information about sales and commissions. When seeking new software, Office Manager Judy Tingley visited dynaMACS at a trade show. She quickly realized that dynaMACS provided everything that their old software did and much more.

dynaMACS Solution

“I was pleased with the reporting capabilities. The number of choices to sort sales and commission information was greatly enhanced,” she says. “dynaMACS provides the flexibility in reporting that we need. Our sales force benefits from territorial reports by salesman. The specific agency reports provide valuable overall information by manufacturers and customers. It enables us to view where the most activity is, where we need to improve our efforts and to cover our territory more effectively and efficiently”.

Jane Janosik, primary user of dynaMACS, provides the owner with weekly and monthly reports. She notes, “The software helps us run the business.”Janosik likes the monthly and year-to-year comparison data and uses this to assess reports from the manufacturers.

Tingley recalls the process of transferring data from the old software to dynaMACS. “dynaMACS customer service helped us every step of the way and nothing was lost in the process.”

Now, years later, dynaMACS is there whenever the agency needs assistance. “We always get a timely response and the representatives are very helpful and patient. They answer our questions, resolve our issues and continue to make improvements to the software.

Tip #1403 – Using Sales Entry Options to Customize Your Sales Entry Screen

March 26, 2014/2 Comments/in dynaMACS Support Tips /by dynaMACS Software

To increase efficiency during sales entry, you can customize some settings temporarily for the current session or permanently for all sessions. You can even have different customized settings for each manufacturer.

Changing “Sales Entry Options” Default Settings

From the dynaMACS main screen menu options select Process Sales Entry Options.
The Sales Entry Options window will open. Each customizable option correlates to a field on the Sales Entry screen.
Select the applicable options from each drop down list and then choose the Apply button to apply these settings to the current session. Select the Save button to save these settings as the default settings for all future sessions.These default settings apply to all manufacturers without an established record in Sales Entry Options. See the next section in this document on Changing Sales Entry Options for a Manufacturer to customize sales entry for a manufacturer.

Changing Sales Entry Options for a Manufacturer

The Sales Entry Options screen also allows you to create customized entry options for individual manufacturers by selecting a manufacturer, choosing the applicable options and then selecting the Save button. Once you have sales entry options saved for a manufacturer, each time you enter sales for this manufacturer the Sales Entry screen will reflect the options chosen here for that manufacturer.

From the Sales Entry Options screen select the Manufacturer radio button and enter the Manufacturer Code.
Select the applicable options from each drop down list and then choose the Save button. These options will be saved for all Sales Entry sessions for that manufacturer.

Field Descriptions and Available Options for Customizing Sales Entry fields:

Set Focus to Mfg After Save – Selecting Yes will save the settings so that after saving an entry the Mfg code is saved for the next sales entry. Selecting No will leave the Mfg field blank for the next sales entry.

Customer – Allows you to select the customer using Customer Code, Manufacturer/Customer Code or Manufacturer Related code. This is useful when you are entering from a sales report or commission statement that has the manufacturer’s customer code.

Sales Rep – By selecting Enter the cursor will STOP at the first Sales Rep field (primary). By selecting Skip the cursor will SKIP the first Sales Rep field primary.

Sales Rep (%) – Commission split percentage for the primary sales rep.

Enter (default) – Allows operator to enter an override for the rep split.
Skip – Bypass this field.

Multiple Sales Rep % – Allows entry of second and third sales reps and their commission split percentages. Note: Rep (%) must be active.

Enter (default) – Sets the fields as active; however, the cursor skips over these fields to minimize keystrokes during entry. You can use the Shift-Tab keys to go back and change these fields.
Skip – Bypass this field.

P.O. No. – Allows entry of the Purchase Order number.

Enter – The cursor stops at this field for entry of each purchase order number.
Skip (default) – bypass this field.

Invoice No. – Allows entry of the invoice number.

Enter (default) – Cursor appears in this field for entry of each invoice number.
Skip – Bypass this field.

Invoice Date – Allows entry of the invoice date.

Enter (default) – The cursor stops at this field for each invoice.
Skip – The field stays active but the cursor does not stop at this field. You can use the mouse or the Shift-Tab keys to go back and change the invoice date.

Post Month – Sets the month/year for posting of the sales entry. (Field is always active but the cursor does not stop at this field to minimize keystrokes. You can use the Shift-Tab keys or the mouse to go back and change it. If you change this field, it changes back to the original setting after the current entry is saved.)

InvMth (default) – Uses the month and year from the invoice date as Post Month. This is the default setting for dynaMACS.
PrMth – Uses the Process Month as the Post Month. The Process Month is in the yellow box under the Options toolbar on the Sales Entry screen. If this month and year is not correct, cancel the session and start over.

Non-Comm/Total $ – Allows entering non-commissionable amount to calculate the total for the entry.

Enter (default) – Cursor stops in this field after entering Sales ($) amount to enter freight or discounts.
Skip – bypass this field.

Commission – Activates the field for entering commission by amount of percentage.

Comm$ (default) – Activates the Commission$ field to enter a commission amount.
Comm% – Activates the Comm% field to enter a commission percentage.

Tip #1402 – Using Sales IQ to Identify New Customers for a Manufacturer

February 25, 2014/in dynaMACS Support Tips /by dynaMACS Software

Sales IQ has a unique feature that will allow you to identify new customers by identifying those that had no sales activity in the previous year but have purchased in the current year. This can be accomplished by using Display New Sales YTD or MTD.

To Identify This Year’s New Customers for a Manufacturer:

From the Sales IQ screen select the Manufacturer tab.
Right click on a manufacturer and select Show Customers.
Select This YTD from the Display New Sales drop down list.
Select the Refresh button.
You will notice that the list has been filtered to display only customers with YTD sales that had NO sales in the previous year for this manufacturer.

Tip #1401 – dynaMACS File Transfer/Combine Wizard

January 31, 2014/in dynaMACS Support Tips /by dynaMACS Software

The Mfg/Cst/Rep Transfer (1)screen has been modified to include a “wizard” button which when selected will help make the transfer process easier for you.

Old Screen . . .

New Screen . . .

When selecting the Wizard button the File Transfer Wizard screen will open. This screen is designed to help ease you through the File Transfer/Combine process.

Example

In the following example we will transfer all data from a customer to a new sales rep.

From the File Transfer Wizard screen select the Customer option from the drop down list in the I Want to Transfer or Combine all data for a:
Select the SalesRep option from the drop down list in the To a different:field.
Select the Proceed To Selection button.
You will notice that after selecting the Proceed To Selection button, the Customer field and the Sales Rep field have been activated in the Transfer Data From and Transfer Data To section of the screen.This screen is very similar to the regular File Transfer/Combine (1) screen, only it will take the guess work out of it by allowing you to only enter data into the fields that have been activated based on your selections in the upper portion of the screen.
Enter the Customer Code or use the Search button to find the code.In this example we will use Adel’s Dist ADED00 location Cincinnati>CI.
For the Sales Rep we will use BG for Bill Grey.
Select the Proceed button.At this point the file transfer process will proceed as normal.

Tag Archive for: cloud

Posts